BriefQR 与 Connecteam 对比
Connecteam is a broad deskless-workforce platform: scheduling, chat, tasks, and a time clock in one app. BriefQR does one thing: a QR-based time clock with PIN and device binding, with no shared logins, biometrics, or hardware kiosk. If you only need clean clock-in/out data, BriefQR is simpler and cheaper; if you want an all-in-one ops app, Connecteam covers far more ground.
逐项对比
| BriefQR | Connecteam | |
|---|---|---|
| 共享账号 | 不需要，使用 PIN 码 + 设备绑定 | 部分 |
| 生物识别 | 否 | 可选 |
| 支持离线使用 | 是 | 有限 |
| 启动所需硬件 | 无需，打印二维码即可 | 可选 |
| 位置验证 | 宽松，可选 | 是 |
| 开放导出 | Webhook、REST 和 CSV | 有限 |
| 起始价格 | 4 欧元 / 员工 / 月 | free for up to 10 users; paid from ~$29/mo for up to 30 users (per hub), see their site |
Connecteam 信息最后核对于 2026-06-22。请在其官网重新验证。
该如何选择？
如果符合以下情况，请选择 BriefQR
Choose BriefQR if your problem is time tracking specifically and you want it portable. Workers scan a printed QR and enter a PIN bound to their device, and it keeps recording offline. You also get neutral export via signed webhook plus REST/CSV, so the hours data stays yours, at a flat €4 per active operator with nothing to pay for idle seats.
如果符合以下情况，请选择 Connecteam
Choose Connecteam if you want more than a time clock: built-in scheduling, team chat, task lists, checklists, and document sharing in a single app. Its free tier for very small teams and its kiosk mode on a shared tablet are genuinely useful, and the breadth can replace several separate tools at once.
算一算价格
Connecteam prices by hub (Operations, Communications, HR) in tiers that bundle a block of users, commonly a paid plan from around $29/month for up to 30 users, then a per-user add-on above that, with a free tier for the smallest teams (verify current numbers on their site). That bundling is good value if you fill the seats and use the whole suite, but you pay for capabilities beyond time tracking. BriefQR charges a flat €4 per active operator per month (or €40/year) and only counts operators who actually clocked in, so a crew that fluctuates month to month does not pay for idle seats.
从 Connecteam 迁移
Moving from Connecteam to BriefQR means exporting your historical timesheets (Connecteam supports CSV and payroll exports) and switching the clock-in method to a printed QR per site or per worker. There is no kiosk tablet to provision or facial-recognition enrollment to redo. You print a code, workers scan, and each sets a PIN bound to their phone. If you used Connecteam only for the time clock, the cutover is quick; if you also relied on its scheduling or chat, keep or replace those separately, because BriefQR does not do them.
常见问题
Is BriefQR a full replacement for Connecteam?
No, and it does not try to be. BriefQR replaces Connecteam's time clock, not its scheduling, chat, or task features. If those are core to your operation, keep them or pair BriefQR with a dedicated scheduling tool.
Do I need a tablet kiosk like Connecteam's kiosk mode?
No. BriefQR works from a printed QR code that workers scan with their own phones, then enter a PIN bound to their device. There is no shared kiosk tablet to buy or set up, though you can mount a single phone or tablet at an entrance if you prefer.
Does BriefQR use facial recognition?
No. Connecteam offers optional facial recognition on its kiosk; BriefQR uses PIN plus device binding instead, so there is no biometric data to collect or store. GPS is recorded as a soft review signal, not continuous tracking.
How does pricing compare?
Connecteam bundles users into tiered hubs starting around $29/month for up to 30 users (check their site). BriefQR is a flat €4 per active operator per month, or €40 per year, billed only for operators who actually clocked in.